WHITE CHEMICAL WR-6 is a highly concentrated, synthetic, heavy-duty multi-purpose cleaner, soluble in both fresh and salt water. WR-6 has greater viscosity, will not separate in hot or cold water, and has excellent hard water stability. WR-6 is completely biodegradable and very safe to use indoors and outdoors. WR-6 is non-toxic, non-polluting, non-flammable, non-injurious to the skin, odorless, and contains no free caustic. WR-6 is used in lieu of solvent based degreasers, soap powders, power wash cleaning compounds, steam cleaning compounds and laundry detergents.

WHITE CHEMICAL WR-6 requires a minimum dilution of 10 parts water per 1 part WR-6, being it is such a highly concentrated product. Dilution ratios vary for individual cleaning tasks, depending on the amount and type of contamination to be removed. For heavy buildups of oil, grease, and hard to remove contaminants, spray the entire surface with undiluted product and allow to penetrate for approximately 30 minutes before rinsing with water.

Typical portions for specific cleaning jobs are as follows:

Drilling rigs, Production Platforms, Marine Engine Rooms and Compressors: 10 parts water to 1 part WR-6 for complete removal of oil, grease, oil-based mud, chromate stains and other heavy soils. WR-6 may be applied while equipment is running and hot.

Shop Maintenance, Machining Tools, Etc.: 15 parts water to 1 part WR-6 for quick wiper-rag removal of oil and grease from floors, walls and other surfaces.

No special handling or storage required. Avoid contact with eyes. In the event of contact with eyes, flush with large amounts of fresh water several times. Openings on containers should always be kept closed when not in use to prevent product contamination. DO NOT TAKE INTERNALLY. FOR INDUSTRIAL USE ONLY.