FA-4 SALT CRYSTAL MODIFIER STICKS are highly effective in dissolving salt scale buildup in flow tubing formed by produced water that becomes so saturated with minerals that it can no longer hold them in solution. They eventually precipitate and form scale. Most often, a pressure drop or rise in temperature causes this precipitation.

FA-4’s remove scale buildup and return the well to optimal production. They can also be used in flow lines and SW injection wells.

Shut In Well
Initial Treatment of 12 FA-4 sticks – shut in well for 24 hours – reopen to production facilities, in some cases, severe salt plugging will require additional FA-4 to restore producing of well. Shut in well for 24 hours for best results.

Well Flowing
Drop 2 FA-4 Salt Crystal Modifiers sticks every three days for 1-2 months or until production improves. For improved flow rates, drop 2 FA-4 sticks each week for maintenance.

CASE HISTORY (Well Shut In):
Operator reported well having severe slugging of flow. Shut well in, then dropped 12 FA-4 sticks. Reopened well 24 hours later. Well still slugging. Shut in well again. Dropped 12 more FA-4 Sticks. Reopened well after 24 hour shut in. Well unloaded excess fluid and production rates were improved. Now drops 2 FA-4 sticks each week for maintenance.

CASE HISTORY (Well Flowing):
Operator shut in well and went in tubing with slick line. Located salt scale at 2000 ft. above perforations. Reopened well. Started program of dropping 2 FA-4 Salt Crystal Modifier sticks every three days. After 45 days, production increased from 120mCF/D to 160mCF/D. Rigged up slick line. No salt scale was found in tubing open to rat hole. Operator no drops 2 FA-4 each week.

No special handling or storage required. Avoid contact with eyes. In the event of contact with eyes, flush with large amounts of fresh water several times. Opening on containers should always be kept closed when not in use to prevent product contamination. DO NOT TAKE INTERNALLY. FOR INDUSTRIAL USE ONLY.