Upgrade Flash Player to Version 8
Click Here To Activate This Website
 
   
   
 
 
 
 

Description

FA-1 FLOW AID FOAM STICKS are very effective in improving production flow rates due to slippage of fluid (water/oil) in the tubing that have caused the flow velocity to decrease. As the hydrostatic head pressure increases due to loading of fluid, surface pressure and flow rates begin to reduce. Once applied, FA-1 Flow Aids start to activate within 5 minutes and are usually fully activated within one (1) hour, depending on temperature, water and gas movement. FA-1 Flow Aids act as a bubble maker which gives a greater lifting effect from the well energy, thereby enabling the well to unload excess fluid.

   
Application:

FA-1 Flow Aids should be applied to the well on a routine basis. Anytime a reduction in flow rates and pressure is observed, additional units of FA-1 should be used. As little as a 5-10% reduction of flow rates and/or pressure can mean loading of the well. It is more profitable and easier to keep a well unloaded than dealing with a dead well.

   
Dosage:
Initial Treatment 4-6 units
Regular Treatment 1-3 units

FA-1 Flow Aids work great in water injection wells by reducing the surface tension of the water, and clearing the perforations, gravel pack and matrix of hydrocarbon. Apply 4-6 FA-1 Flow Aid units and continue their use on regular program.

FA-1 Flow Aids have been proven successful in removing water blocks that stop or reduce the movement of oil. Apply 4-6 FA-1 units with the well shut in for a minimum of 12 hours. Reopen the well; repeat treatment if necessary until water block is removed.

   
Foam Height Test: Initial foam height 1150 mls at 30 seconds
Half life at 275 seconds

 

Packaging:

Available individually, pail of 40, ice chest of 75 or drum of 396.

 
Precautions:
No special handling or storage required. Avoid contact with eyes. In the event of contact with eyes, flush with large amounts of fresh water several times. Opening on containers should always be kept closed when not in use to prevent product contamination. DO NOT TAKE INTERNALLY. FOR INDUSTRIAL USE ONLY.

 

 

Home · Products · Services · MSDS Requests · Distributors · Contact Us · Site Map

Entire Site Copyright © White Chemical International, Inc. All Rights Reserved